2004 Mercury Marauder Owner's Manual - Page 43
2004 Mercury Marauder Manual
Page 43 highlights
Driver Controls 4. Press the RESET button to de-calibrate the compass. The display will read CIRCLE SLOWLY TO CALIBRATE for a few seconds and then display a direction with CAL displayed on the right side. 5. Slowly drive the vehicle in a circle (less than 5 km/h [3 mph]). This will take up to three circles to complete calibration. 6. The correct compass heading will be displayed when the compass is calibrated. Note: If the RESET button is not pressed, the compass will exit calibration mode after three minutes of no activity and the original calibration data will be restored. Note: If power is interrupted during the calibration process, the compass resets to the original calibration data from before the calibration process started. HomeLink mode Train mode Note: Do not train the HomeLink with the vehicle parked in the garage. To train a HomeLink button to control a specific device: 1. Select the HomeLink button to train. 2. Press and continuously hold the button for 20 seconds. CHANNEL X TRANSMIT will be displayed (X will be 1, 2, or 3) during this time. Note: If more than one button is pressed, priority will be given to the lowest numbered channel. 43 2004 Marauder (mdr) Owners Guide (post-2002-fmt) USA English (fus)