2004 Mercury Marauder Owner's Manual - Page 52

Driver Controls Increasing speed while using speed control There are two ways to set a higher speed: • Press and hold the SET ACCEL control until you get to the desired speed, then release the control. You can also use the SET ACCEL control to operate the Tap-Up function. Press and release this control to increase the vehicle set speed in small amounts by 1.6 km/h (1 mph). • Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed press and release the SET ACCEL control. Reducing speed while using speed control There are two ways to reduce a set speed: • Press and hold the COAST control until you get to the desired speed, then release the control. You can also use the COAST control to operate the Tap-Down function. Press and release this control to decrease the vehicle set speed in small amounts by 1.6 km/h (1 mph). • Depress the brake pedal until the desired vehicle speed is reached, press the SET ACCEL control. Turning off speed control There are two ways to turn off the speed control: • Depress the brake pedal. This will not erase your vehicle's previously set speed. 52 2004 Marauder (mdr) Owners Guide (post-2002-fmt) USA English (fus)