2004 Mercury Mountaineer Owner's Manual - Page 74
2004 Mercury Mountaineer Manual
Page 74 highlights
Driver Controls To reset the oil monitoring system to 100% after each oil change [approximately 8,000 km (5,000 miles) or 180 days] perform the following: 1. Select this function from the SETUP control for current display mode. 2. Press and release the RESET control to display "HOLD RESET TO CONFIRM". 3. Press and hold the RESET control to display "OIL LIFE SET TO 100%". Your oil life is now reset. To reset the oil monitoring system to your personalized oil life %: 1. From step 3 above. 2. Release the RESET control momentarily, then press RESET and SETUP controls at the same time to activate a service mode which will display "OIL LIFE XX% RESET TO ALTER". 3. Press RESET until you find your personalized OIL LIFE XX%. 4. With your personalized OIL LIFE XX% displayed, press SETUP to continue the system check. DATA ERR. These messages indicate improper operation of the vehicle network communication between electronic modules. • Brake fluid • Fuel computer • Oil life • Compass • Charging system • Outside temperature • Door sensor • Engine sensor • Washer fluid 74 2004 Mountaineer (mnt) Owners Guide (post-2002-fmt) USA English (fus)