2006 Mercury Mariner Owner Guide 2nd Printing - Page 62
2006 Mercury Mariner Manual
Page 62 highlights
Driver Controls 4WD LOCKED TEMPORARILY (if equipped). Displayed when the 4X4 is temporarily locked. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible. 4WD DISABLED TEMPORARILY (if equipped). Displayed when the 4X4 is temporarily disabled. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible. 4WD AUTO RESTORED (if equipped). Displayed when the 4X4 is restored to normal operations. ENGINE OIL CHANGE SOON/ENGINE OIL CHANGE NOW. Displayed when the engine oil life remaining is 5% or less. When oil life left is between 5% and 0%, the ENGINE OIL CHANGE SOON message will be displayed. When oil life left reaches 0%, the ENGINE OIL CHANGE NOW message will be displayed. An oil change is required whenever indicated by the message center. USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 12 months] perform the following: 1. Select this function from the INFO menu then press the SET control to access the system check function. 2. Press and release the SET control to display "OIL CHNG XXX% HOLD SET NEW". 3. Press and hold the SET control for 2 seconds to display "OIL CHANGE SET TO 100%". INFO UNAVAIL. These messages indicate improper operation of the vehicle network communication systems for the following vehicle modules. 62 2006 Mariner (mrn) Owners Guide (post-2002-fmt) USA (fus)