2006 Mercury Montego Owner Guide 2nd Printing - Page 51
2006 Mercury Montego Manual
Page 51 highlights
Lights Replacing HID headlamp bulbs The low beam headlamps on your vehicle use a "high intensity discharge" source. These lamps operate at a high voltage. The bulb is NOT replaceable. When the bulb is burned out, the bulb assembly must be replaced by your authorized dealer. Replacing front parking lamp/turn signal bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Turn the front wheels inboard and loosen the three screws on the splash shield in front of the tire. 3. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 4. To remove the bulb, pull it straight out of the bulb socket. Install the new bulb(s) in reverse order. Replacing front sidemarker bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Turn the front wheels inboard and loosen the three screws on the splash shield in front of the tire. 3. Locate the sidemarker lamp electrical connector and remove it by pulling it straight off. 4. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 5. To remove the bulb, pull it straight out of the bulb socket. Install the new bulb(s) in reverse order. 51 2006 Montego (mgo) Owners Guide (post-2002-fmt) USA (fus)