2009 Mercury Grand Marquis Owner's Manual - Page 128
2009 Mercury Grand Marquis Manual
Page 128 highlights
Seating and Safety Restraints 8. Remove remaining slack from the belt. Force the seat down with extra weight, e.g., by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt. This is necessary to remove the remaining slack that will exist once the additional weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to the vehicle. Sometimes, a slight lean towards the buckle will additionally help to remove remaining slack from the belt. 9. Attach the tether strap (if the child seat is equipped). Refer to Attaching child safety seats with tether straps later in this chapter. 10. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward and back. There should be no more than 1 inch (2.5 cm) of movement for proper installation. 11. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) to make certain the child restraint is properly installed. Installing child safety seats in the lap belt seating positions WARNING: Installing a child safety seat in the front row lap seating position should be avoided if at all possible. WARNING: Never place a rear-facing child seat in the front center seating position of a vehicle with rear seating positions. 128 2009 Grand Marquis (grn) Owners Guide (own2002), 2nd Printing USA (fus)