2009 Mercury Mariner Scheduled Maintenance Guide 1st Printing - Page 23

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 90,000 miles ❑ Change engine oil and replace oil filter ❑ Inspect automatic transmission/transaxle fluid level on vehicles if equipped with dipstick. Consult your dealer for your particular requirements. Replace cabin air filter (if equipped) Replace climate-controlled seat filter (if equipped) Replace engine air filter Replace fuel filter (except Escape, Mariner, F-Series [non Super Duty], Expedition/Navigator [short wheel base only], E-Series) Replace spark plugs Inspect steering linkage, ball joints, suspension, tie rod ends, driveshaft, and U-joints (lubricate if equipped with Zerk fittings) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect accessory drive belts Inspect and lubricate 4x4 front axle U-joints Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: Normal Schedule Trucks, Fullsize Vans & SUVs 97,500 miles Change engine oil and replace oil filter Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) RO#: DATE: DEALER VALIDATION: P&A CODE: MILEAGE: Scheduled Maintenance 23 2009 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide USA (fus)