2010 Mercury Milan Scheduled Maintenance Guide 1st Printing - Page 34
2010 Mercury Milan Manual
Page 34 highlights
NORMAL SCHEDULE CARS & CUVS 67,500 miles ❑ Change engine oil and replace oil filter ❑ Inspect cabin air filter (if equipped) ❑ Rotate tires, inspect tires for wear and measure ❑ Inspect the wheels and related components for ❑ Perform multi-point inspection (recommended) abnormal noise, wear, looseness, or drag RO#: DATE: DEALER VALIDATION: tread depth P&A CODE: MILEAGE: 75,000 miles ❑ Change engine oil and replace oil filter ❑ Replace cabin air filter (if equipped) ❑ Inspect and lubricate steering linkage, ball joints suspension, tie rod ends, driveshaft and U-joints (lubricate if equipped with Zerk fittings) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect transmission fluid level (if equipped with an underhood dipstick) Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 82,500 miles ❑ Change engine oil and replace oil filter ❑ Inspect cabin air filter (if equipped) ❑ Rotate tires, inspect tires for wear and measure ❑ Inspect the wheels and related components for ❑ Perform multi-point inspection (recommended) abnormal noise, wear, looseness, or drag RO#: DATE: DEALER VALIDATION: tread depth P&A CODE: MILEAGE: 34 Scheduled Maintenance 2010 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 1st Printing USA (fus)