2010 Mercury Milan Scheduled Maintenance Guide 1st Printing - Page 40
2010 Mercury Milan Manual
Page 40 highlights
NORMAL SCHEDULE CARS & CUVS 150,000 miles ❑ Change engine oil and replace oil filter ❑ Change Motorcraft Premium Gold Engine Coolant (see Exceptions on page 47 and Premium Gold Coolant Change Record on page 48) Change automatic transmission fluid Replace automatic transmission fluid filter (except 5F55, 6F35 and AWF-21 transaxles) Change manual transmission fluid Replace rear axle lubricant on all rear wheel drive (RWD) vehicles (see pages 41 and 47). Replace climate-controlled seat filter (if equipped) Replace engine air filter (except Focus with PZEV engine) Replace cabin air filter (if equipped) Replace fuel filter (Crown Victoria, Grand Marquis, Town Car and Mustang) Replace accessory drive belt(s) if not replaced in the last 100,000 miles (160,000 km) Inspect and lubricate steering linkage, ball joints, suspension, tie rod ends, driveshaft and U-joints (lubricate if equipped with Zerk fittings) Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Rotate tires, inspect tires for wear and measure tread depth Inspect the wheels and related components for abnormal noise, wear, looseness, or drag Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 40 Scheduled Maintenance 2010 Scheduled Maintenance Guide (smg) Scheduled Maintenance Guide, 1st Printing USA (fus)