1998 Nissan Quest Owner's Manual - Page 131
1998 Nissan Quest Manual
Page 131 highlights
the passenger compartment under cold outside conditions before the engine is warmed up. CAUTION Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up. 3. Move the temperature control dial to the desired position. Ventilation This mode directs air to the side and center vents. 1. Push the button in. Air recirculation button Fresh position (indicator light off): Outside air is drawn into the passenger compartment. Use this position for normal heater or air conditioner operation. Recirculate position (indicator light on): Interior air is recirculated inside the vehicle. Activate the air recirculation button when driving on a dusty road or to help keep out traffic fumes. Activate the air recirculation button for improved air conditioner performance under high temperature and high humidity conditions. or If the system is operating in the mode, the system does not allow the air recirculate mode to be selected. Air conditioner button Start the engine, move the fan control dial to the desired (one to four) position, select an air control button and push the air conditioner button to turn on the air conditioner. The indicator light comes on when the air conditioner is on. To stop the air conditioner, push the button again; the indicator light goes off. The air conditioner cooling function operates only when the engine is running. 2. Turn the fan control dial to select speed. 3. Move the temperature control dial to the desired position. Defrosting or defogging This mode is used to defrost/defog the windows. 1. Push the button in. 2. Turn the fan control dial to select speed. 3. Move the temperature control dial to the desired position. When the button is pushed, the air conditioner automatically turns on to defog the windshield. The air recirculation mode automatically turns off to reduce window fogging. When is selected, the air conditioner indicator light does not illuminate HEATER OPERATION Heating This mode is used to direct most of the hot air to the floor outlets. Push the air recirculation button to the off position for normal heating. 1. Push the button in. 2. Turn the fan control dial to select speed. 4-4 Heater, air conditioner and audio systems