2000 Nissan Frontier Owner's Manual - Page 153
2000 Nissan Frontier Manual
Page 153 highlights
TO SHIFT TRANSFER CASE: From 2H to 4H SHIFT PROCEDURE FOR AUTO-LOCK FREE-RUNNING HUBS Move the transfer lever to 4H at speeds below 25 MPH (40 km/h). It is not necessary to depress the clutch pedal. Perform this operation when driving straight. Move the transfer lever to 2H. This can be done at any speed, and it is not necessary to depress the clutch pedal. Perform this operation when driving straight. NOTE: AUTO-LOCK hubs will not disengage until the vehicle is moved about 3 feet (1 m) in the opposite direction of travel: ¼ When driving forward, stop and move the vehicle 3 feet (1 m) in reverse. ¼ When backing up, stop and move 3 feet (1 m) forward, then move the vehicle about 3 feet (1 m) in reverse. Disengaging the AUTO LOCK hubs will allow for better fuel economy, quieter ride and less component wear. 1. Stop the vehicle. 2. Depress the clutch pedal, or place the selector lever in the N (Neutral) position. 3. Depress the transfer lever and move it to the 4L or 4H position. Change gears quickly and smoothly. 1. Stop the vehicle. 2. Depress the clutch pedal, or place the selector lever in the N (Neutral) position. 3. Depress the transfer lever and move it to 4L. Change gears quickly and smoothly. 1. Stop the vehicle. 2. Depress the clutch pedal, or place the selector lever in the N (Neutral) position. 3. Depress the transfer lever and move it to 2H. Change gears quickly and smoothly. NOTE: Follow the NOTE shown in shifting from 4H to 2H. From 4H to 2H From 4H to 4L or 4L to 4H From 2H to 4L From 4L to 2H Starting and driving 5-23