2005 Nissan Titan Owner's Manual - Page 277
2005 Nissan Titan Manual
Page 277 highlights
WDI0407 LDI0387 LDI0404 2. Open the glove box, then remove the four upper glove box screw. It is not necessary to remove the two glove box striker screws. Remove the glove box assembly from the instrument panel to access the in-cabin microfilter cover. 3. Remove the filter cover bolt and remove the filter cover. NOTE: The filters are marked with air flow arrows. The end of the filter with the arrow should face the rear of the vehicle. The arrows should face downward. 4. Insert the first filter into the housing and slide it over to the right. Insert the second filter into the housing. 5. Replace the filter cover. 6. Install the glove box door. 7. Fill out the date information on the small replacement label and attach it to the glove box lid. Maintenance and do-it-yourself 8-17