2005 Nissan Xterra Owner's Manual - Page 35
2005 Nissan Xterra Manual
Page 35 highlights
Stowing the center seat belt When folding down the rear seat, the rear center seat belt can be retracted into a stowed position as follows: 1 Hold the connector tongue so that the seat belt does not retract suddenly when the tongue is released from the connector buckle. Release the connector tongue by inserting a suitable tool such as key into the connector buckle A and release the connector tongue. Retract the seat belt up to the retractor base. Fold the connector tongue into the molded retractor base. Then pull enough slack in the seat belt to secure the seat belt tongue into the slot on the retractor base. Pull the seat belt so that it will lay flat in the ceiling. 2 SSS0241 3 WARNING ● Always fasten the connector tongue and the seat belt in the order shown. ● Always make sure both the connector tongue and the seat belt tongue are secured when using the seat belt. Do not use it with only the seat belt tongue attached. This could result in serious personal injury in case of an accident or a sudden stop. WARNING ● Do not unfasten the rear center seat belt connector except when folding down the rear seat. LRS0601 Safety-Seats, seat belts and supplemental restraint system 1-17