2006 Nissan Xterra Owner's Manual - Page 112

information" in the "Technical and consumer information" section later in this manual. The crossbars can be adjusted or removed. Use the Torxdriver provided in the tool kit to loosen both crossbar adjusting screws. To adjust: 1. Loosen the adjusting screws with the Torxdriver 1 by turning counterclockwise A. 2. When the clamp is loosened, move the crossbar so the cargo can be positioned on the crossbar B . 3. Tighten the crossbar adjusting screws with the Torxdriver by turning clockwise. 4. Secure the cargo with rope. 5. Always check the tightness of the crossbar adjusting screws. To remove: 1. Loosen the adjusting screws with the Torxdriver 1 by turning counterclockwise A. 2. Rotate the clamps C . 3. Remove the crossbar. 4. Reverse to install. 5. Always check the tightness of the crossbar adjusting screws. WARNING Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury. CAUTION ● Use care when placing or removing items from the roof rack. If you cannot comfortably lift the items onto the roof rack from the ground, use a ladder or stool. ● Do not place items on top of the gear basket lid. Doing so could damage the lid. 2-40 Instruments and controls