2007 Nissan Maxima Owner's Manual - Page 170
2007 Nissan Maxima Manual
Page 170 highlights
● Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up. Start the engine and operate the controls to activate the air conditioner. is cooled rapidly. This does not indicate a malfunction. 3. You can individually set driver and front passenger side temperature using each temperature control dial. When the DUAL button or passenger side temperature dial is turned, the DUAL indicator will come on. To turn off the passenger side temperature control, push the DUAL button. Dehumidified defrosting or defogging 1. Push the defroster button on. The indicator light on the button will come on. 2. Turn the temperature control dial to set the desired temperature. ● To quickly remove ice from the outside of the windows, set the fan speed to maximum. ● As soon as possible after the windshield is clean, push the AUTO button to return to the automatic mode. ● When the front defroster button is pushed, the air conditioner will automatically be turned on at outside temperatures above 23°F ( 5°C). The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. AUTOMATIC OPERATION Cooling and/or dehumidified heating (AUTO) This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically. 1. Push the AUTO button on. (AUTO will be displayed.) 2. Turn the temperature control dial to the left or right to set the desired temperature. ● Adjust the temperature display to about 75° F (24° C) for normal operation. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air Heating (A/C OFF) The air conditioner does not activate. When you need to heat only, use this mode. 1. Push the A/C button. (A/C OFF will be displayed and A/C indicator will turn off.) 2. Turn the temperature control dial to set the desired temperature. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. ● Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly. ● Not recommended if windows fog up. MANUAL OPERATION Fan speed control Push the fan control button control the fan speed. to manually Push the AUTO button to return to automatic control of the fan speed. 4-20 Display screen, heater, air conditioner, audio and phone systems