2010 Nissan Murano Owner's Manual - Page 201
2010 Nissan Murano Manual
Page 201 highlights
. The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly. Not recommended if windows fog up. compartment to improve the defogging performance. MANUAL OPERATION Fan speed control Turn the " " fan speed control dial to manually control the fan speed. Push the "AUTO" button to return to automatic control of the fan speed. about 2 seconds. The indicator lights will flash twice, and then the intake air will be controlled automatically. . Air flow control Pushing the "MODE" manual air flow control button selects the air outlet to: : : : : Air flows from center and side ventilators. Air flows from center and side ventilators and foot outlets. Air flows mainly from foot outlets. Air flows from defroster and foot outlets. . Dehumidified defrosting or defogging 1. Push the " " front defroster button. (The indicator light on the button will come on.) 2. Operate the temperature control buttons (type A) dial (type B) to set the desired temperature. . To quickly remove ice from the outside of the windows, turn the " " fan speed control dial and set it to the maximum position. As soon as possible after the windshield is clean, push the "AUTO" button to return to the auto mode. When the " " front defroster button is pushed, the air conditioner will automatically be turned on at outside temperatures above 238F (−58C) to defog the windshield, and the air recirculate mode will automatically be turned off. Outside air is drawn into the passenger Air recirculation Push the intake air control button " " to recirculate interior air inside the vehicle. The " will come on. indicator light " The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode " ". Upper vent system When the " " upper vent button is pushed, the air flow against the driver's or passenger's upper body becomes gentle. The indicator light on the button will come on. In this mode, air from the center ventilators flows both straight and upward in order to control the cabin temperature without blowing air directly on the occupants. If you want strong air flow against your upper " button to turn the body, push the " indicator light off. Outside air circulation Push the intake air control button " " to change the air circulation from the intake air to " will turn the outside air. The indicator light " off. . . Automatic air intake control In the AUTO mode, the intake air will be controlled automatically. To manually control the intake air, push the intake air control button ". To return to the automatic control mode, " " for push the intake air control button " Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-29