2010 Nissan Versa Owner's Manual - Page 219

To remove the key from the ignition switch: 1. Shift the shift selector to the P (Park) position with the ignition switch in the ON position. 2. Place the ignition switch in the LOCK position. 3. Remove the key from the ignition switch. If the shift selector is shifted to the P (Park) position after the ignition switch is turned to the OFF position or when the ignition switch cannot be turned to the LOCK position, proceed as follows to remove the key. 1. Move the shift selector into the P (Park) position. 2. Turn the ignition switch slightly toward the ON position. 3. Turn the ignition switch to the LOCK position. 4. Remove the key. The shift selector is designed so it cannot moved out of P (Park) and into any of the other gear positions if the ignition switch is turned to OFF position 1 or if the key is removed from the switch. The shift selector can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. There is an OFF position 1 between the LOCK and ACC positions. The OFF position is indicated by a "1" on the key cylinder. WSD0052 Type A MANUAL TRANSMISSION The ignition switch includes a device that helps prevent accidental removal of the key while driving. The key can only be removed when the ignition switch is in the LOCK position. Type A models without Intelligent Key: To turn the ignition key to the LOCK position from the ACC or ON position, turn the key to OFF, push the key in, then turn the key to LOCK. 5-10 Starting and driving