2011 Nissan Titan Crew Cab Owner's Manual - Page 264
2011 Nissan Titan Crew Cab Manual
Page 264 highlights
M4 (Fourth): For driving up or down long slopes where engine braking would be advantageous. Shift ranges up or down one by one as follows: M1 ←→ M2 ←→ M3 ←→ M4 M4 will be displayed on the position indicator in the meter. M3 (Third): Use for hill climbing or engine braking on downhill grades. WSD0188 M1 (First): Use this position when climbing steep hills slowly or driving slowly through deep snow, sand or mud, or for maximum engine braking on steep downhill grades. M1 will be displayed on the position indicator on the meter. ● Remember not to drive at high speeds for extended periods of time in lower than M4 range. This reduces fuel economy. When shifting up: Move the shift selector to the + (up) side. (Shifts to higher range.) When shifting down: Move the shift selector to the Ϫ (down) side. (Shifts to lower range.) ● The transmission will automatically downshift the gears. (For example, if you select the 3rd range, the transmission will shift down between the 3rd and 1st gears.) ● Moving the shift selector rapidly to the same side twice will shift the ranges in succession. Shift ranges up or down one by one as follows: M1 ←→ M2 ←→ M3 M3 will be displayed on the position indicator in the meter. M2 (Second): Use for hill climbing or engine braking on downhill grades. Shift ranges up or down one by one as follows: M1 ←→ M2 M2 will be displayed on the position indicator in the meter. Manual shift mode A is When the manual shift mode button ᭺ pressed while driving, the transmission enters the manual shift mode. Shift ranges can be selected manually. In the manual shift mode, the shift range is displayed on the position indicator in the meter. After pressing the manual shift mode button, the position indicator first displays M4 (Fourth) Shift ranges up or down one by one as follows: M1←→ M2 ←→ M3 ←→ M4←→D Starting and driving 5-17