2011 Nissan Titan Crew Cab Owner's Manual - Page 293
2011 Nissan Titan Crew Cab Manual
Page 293 highlights
WCE0152 LCE0087 2. Place the jack directly under the jack-up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. The jack-up points are indicated by stamped arrows on the side of the frame. The jack should be used on firm and level ground. 3. Install the assembled jack rod into the jack as shown. 4. To lift the vehicle, securely hold the jack lever and rod. Carefully raise the vehicle until the tire clears the ground. 5. Remove the wheel nuts and then remove the tire. 6-6 In case of emergency
2. Place the jack directly under the jack-up
point as illustrated so the top of the jack
contactsthevehicleatthejack-uppoint.The
jack-uppointsareindicatedbystampedar-
rowsonthesideoftheframe.
The jack should be used on firm and
levelground.
3. Install the assembled jack rod into the jack
asshown.
4. Toliftthevehicle,securelyholdthejacklever
androd.Carefullyraisethevehicleuntilthe
tireclearstheground.
5. Removethewheelnutsandthenremovethe
tire.
WCE0152
LCE0087
6-6
Incaseofemergency