2012 Nissan Armada Owner's Manual - Page 361

2WD or 4WD shift procedure: 4WD Shift Switch Position Wheels Driven 4WD shift Indicator Light Transfer 4LO position Use Conditions 4WD Shift Procedure Move the 4WD switch. 2WD AUTO 4H 4WD shift indicator light will indicate transfer shift position engaged. IT IS NOT NECESSARY TO MOVE THE SHIFT SELECTOR TO THE N POSITION IN THIS OPERATION. PERFORM THIS OPERATION WHEN DRIVING STRAIGHT. Rear wheels or 4 wheels AUTO For driving on paved or slippery roads Rear wheels 2WD 4 wheels 4H Neutral *1 May blink 4 wheels 4LO Illuminated For driving on dry, paved roads (Economy drive) For driving on rocky, sandy or snowcovered roads Neutral disengages the automatic transmission mechanical parking lock, which will allow the vehicle to roll. Do not leave the transfer shift position in Neutral.*2 For use when maximum power and traction is required (for example: on steep grades or rocky, sandy, muddy roads) 1. Stop the vehicle. 2. Move the shift selector to the N position. 3. Push the 4WD shift switch and move it to 4LO or 4H with the brake pedal depressed. YOU CANNOT MOVE THE TRANSFER 4WD SHIFT SWITCH BETWEEN 4H AND 4LO (OR 4LO TO 4H) UNLESS YOU HAVE FIRST STOPPED THE VEHICLE, DEPRESSED THE BRAKE PEDAL AND MOVED THE SHIFT SELECTOR TO NEUTRAL. *3 *1: The transfer 4LO position indicator light may blink. Stop the vehicle. Be sure to shift the 4WD shift switch after the shift selector has been moved to the N position. If the indicator light keeps blinking after the 4WD shift procedure in the previous page, drive slowly without abrupt maneuvers for a while. Then the light will turn on or off. • Avoid making a turn or abrupt starts while shifting to 4LO. Otherwise gears may grind, damaging the drive system. 5-24 Starting and driving