2012 Nissan Maxima Owner's Manual - Page 117

MOONROOF (if so equipped) If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Place the ignition switch in the ON position. 2. Close the door. 3. Open the window more than halfway by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch for more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. If the power window automatic function does not operate properly after performing the above procedure, have your vehicle checked by a NISSAN dealer. LIC1408 To open or close the moonroof part way, push the switch in any direction while the moonroof is sliding to stop it in the desired position. Tilting the moonroof Close the moonroof by pushing the switch 2 . Release the switch, then push toward ᭺ 2 again to tilt the the switch toward ᭺ moonroof up. To tilt the moonroof down, push the switch 1 . toward ᭺ WARNING AUTOMATIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The automatic moonroof is operational for a period of time, even if the ignition switch is placed in the ACC or OFF position. If the driver's door or the front passenger's door is opened during this period of time, the power to the moonroof is canceled. ● In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. ● Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing. Sliding the moonroof To fully open the moonroof, push the switch 1 . toward ᭺ To fully close the moonroof, push the switch 2 . toward ᭺ 2-46 Instruments and controls