2012 Nissan Pathfinder Owner's Manual - Page 130

WINDOWS Be careful that your vehicle does not exceed the Gross Vehicle Weight Rating (GVWR) or its Gross Axle Weight Rating (GAWR front and rear). The GVWR and GAWR are located on the F.M.V.S.S. label (located on the driver's door pillar). For more information regarding GVWR and GAWR, refer to "Vehicle loading information" in the "Technical and consumer information" section later in this manual. The front and rear cross bars (if so equipped) can be adjusted or removed. To adjust: A on 1. Loosen the 2 Torxா head fasteners ᭺ both ends of the crossbar. 7. Always check the tightness of the Torxா head fasteners. To remove: A on 1. Loosen the 2 Torxா head fasteners ᭺ both ends of the crossbar. POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls and become trapped in a window. Unattended children could become involved in serious accidents. The power windows operate when the ignition switch is placed in the ON position, or for a period of time after the ignition switch is placed in the OFF position. If the driver's or passenger's door is opened during this period of time, the power to the windows is canceled. 2. Remove the crossbar from the roof rack. 2. Remove the plugs at the desired position C ). (᭺ B to the desired position 3. Slide the crossbar ᭺ C ) so that the holes in the crossbar line up (᭺ with the holes in the sidebar. 4. Tighten the 2 Torxா head fasteners on both ends of the crossbar. 5. Reinstall the plugs at the previous position A. ᭺ 6. Position your luggage on the crossbars and secure the luggage with rope. Instruments and controls 2-45