2013 Nissan Frontier King Cab Owner's Manual - Page 179

NOTE: Use care when rotating extender, buckles may come in contact with the truck bed railing. WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury. Removing and installing the bed extender To remove or install the bed extender perform the following: 1. Open the tailgate. 2. Rotate the bed extender into a vertical position and lift straight up (to remove) or lower straight down (to install). To store the bed extender in the front of the truck when not in use perform the following: 1. Position the sliding brackets past the center of the wheel well. 2. Re-install the extender into the brackets (see above). 3. Rotate the extender to the inward position. 4. Push the brackets forward until the extender comes in contact with the front wall of the truck box. LTI0102 TIE DOWN HOOKS (if so equipped) For your convenience, tie down hooks are placed at each corner of the truck box. These may be used to help secure cargo loaded into the truck box. ● The weight of the cargo load must be evenly distributed over both the front and the rear axles. ● All cargo should be securely fastened with ropes or straps to prevent it from shifting or sliding within the vehicle. 3-22 Pre-driving checks and adjustments