2013 Nissan Frontier King Cab Owner's Manual - Page 64

7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 6. WRS0697 LRS0598 Forward-facing - step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LATCH attachment path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and check to see if the LATCH attachment holds the restraint in place. If the restraint is not secure, tighten the LATCH attachment as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING LATCH - JUMP SEAT (King cab models only) WARNING ● A child restraint system will not be installed properly and the child could be seriously injured or killed in a sudden stop or collision. - Do not install a child restraint system on the passenger's side jump seat without unfolding the seat extender. Safety-Seats, seat belts and supplemental restraint system 1-45