2015 Nissan Rogue Owner's Manual - Page 198

A if the object projects over the the position ᭺ actual backing up course. HOW TO SWITCH THE DISPLAY With the ignition switch in the ON position, press the CAMERA button or move the shift lever to the R (Reverse) position to operate the Around View Monitor. The Around View Monitor displays different split screen views depending on the position of the shift lever. Press the CAMERA button to switch between the available views. If the shift lever is in the R (Reverse) position, the available views are: ● Rear view/bird's-eye view split screen ● Rear view/front-side view split screen If the shift lever is in the P (Park) position, the available views are: LHA1202 ● The shift lever is in the D (Drive) position and the vehicle speed increases above approximately 6 mph (10 km/h) ● A different screen is selected. HOW TO ADJUST THE CAMERA SETTINGS 1. When the car is in P (park), press the [ ] button. 2. Touch the SETTINGS key. 3. Touch the SYSTEM key. 4. Select CAMERA SETTINGS. 5. Use the TUNE-SCROLL knob and the ENTER/AUDIO button to switch between DAY, NIGHT, and AUTO mode and to adjust the BRIGHTNESS, CONTRAST, and COLOR settings for the Around View Monitor. Do not adjust any of the CAMERA DISPLAY SETTINGS of the Around View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied. ● Front view/bird's-eye view split screen ● Front view/front-side view split screen If the shift lever is in the D (Drive) position, the only available view is front view/front-side view split screen. The display will switch from the Around View Monitor screen when: Backing up behind a projecting object C is shown farther than the position The position ᭺ B in the display. However, the position ᭺ C is ᭺ A. actually at the same distance as the position ᭺ The vehicle may hit the object when backing up to Monitor, climate, audio, phone and voice recognition systems 4-21