2015 Nissan Rogue Owner's Manual - Page 234
2015 Nissan Rogue Manual
Page 234 highlights
SXM settings To view the SXM settings: 1. Press the [ ] button. SXM band select Pressing the SXM button will change the band as follows: SXM1* → SXM2* → SXM3*→ SXM1* (satellite, if so equipped) When the SXM button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the last station played. The last station played will also come on when the POWER button is pressed. *When the SXM button is pressed, the satellite radio mode will be skipped unless an optional satellite receiver and antenna are installed and a SiriusXM® Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. If a compact disc is playing when the SXM button is pressed, the compact disc will automatically be turned off and the last radio station played will come on. While the radio is in SXM mode, the operation can be controlled through the touch-screen. Touch the "Channels" key to display a list of channels. Touch a channel displayed on the list to change to that channel. Touch the "Categories" key to display a list of categories. Touch a category displayed on the list to display options within that category. Tuning with the touch-screen When in AM or FM mode, the radio can be tuned using the touch-screen. To bring up the visual tuner, touch the "Tune" key on the lower right corner of the screen. A screen appears with a bar running from low frequencies on the left to high frequencies on the right. Touch the screen at the location of the frequency you wish to tune and the station will change to that frequency. To return to the regular radio display screen, touch the "OK" key. Tuning with the TUNE/SCROLL knob The radio can also be manually tuned using the TUNE/SCROLL knob. When in FM or AM mode, turn the TUNE/SCROLL knob to the left for lower frequencies or to the right for higher frequencies. When in SXM mode, turn the TUNE/SCROLL knob to change the channel. SEEK tuning When in FM or AM mode, press the or seek buttons to tune from low to high or high to low frequencies and to stop at the next broadcasting station. or When in SXM mode, press the seek buttons to change the category. 2. Touch the "Settings" key. 3. Touch the "SXM" key. The signal strength, activation status and other information are displayed on the screen. FM/AM/SAT radio operation FM·AM button Press the FM·AM button to change the band as follows: AM → FM1 → FM2 → AM If another audio source is playing when the FM·AM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. The FM stereo indicator (STEREO) is shown on the screen during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. Monitor, climate, audio, phone and voice recognition systems 4-57