2003 Polaris Sportsman 700 Owners Manual - Page 98
2003 Polaris Sportsman 700 Manual
Page 98 highlights
MAINTENANCE AND LUBRICATION Filter Systems Air Filter Service 1. Remove the seat, release the clips, and remove the air box cover. 2. Loosen the clamp and remove the filter. 3. Remove the fabric type pre-filter (1) from the main filter (2). Wash the pre-filter in soapy water, then rinse and let dry. 4. Reinstall the pre-filter over the main filter. (Replace the main filter if needed.) 5. Reinstall the filter into the air box and tighten the clamp. Do not over tighten the clamp, as filter damage could occur. 2 1 Breather Filter/Hose 1. To access the breather filter, remove the left side panel as outlined on page 93. 2. Remove the clamps and pull the filter (3) out of the hoses. NOTE: It's not necessary to remove the lower hose from the engine. 3. Inspect the filter for debris. Blow gently through the filter in the direction of the arrow to check for clogging. 3 Replace if needed. 4. Check the hoses for cracks, deterioration, abrasion, or leaks. Replace as needed. 5. Reinstall the filter with the arrow pointing toward the engine and secure the clamps. CAUTION Operation of your vehicle without a breather filter can cause engine damage. Always reinstall the breather filter after removing for service. 96