2005 Polaris Sportsman 600 Owners Manual - Page 117

2005 Polaris Sportsman 600 Manual

Get 2005 Polaris Sportsman 600 PDF manuals and user guides View all 2005 Polaris Sportsman 600 manuals

Page 117 highlights

TROUBLESHOOTING Drive Belt and Cover Problems Possible Cause Driving the ATV onto a pickup or tall trailer in high range. Starting out going up a steep incline. Solution Shift transmission to low range during loading of the ATV to prevent belt burning. When starting out on an incline, use low range or dismount the ATV (after first applying the park brake) and perform the K-turn as described on page 60. Driving at low RPM or Drive at a higher speed or use low range more frequently. low ground speed (at The use of low range is highly recommended for cooler approximately 3-7 MPH). PVT operating temperatures and longer component life. Insufficient warm-up of Warm the engine at least 5 minutes. With the transmission ATVs exposed to low am- in neutral, advance the throttle to about 1/8 throttle in bient temperatures. short bursts, 5 to 7 times. The belt will become more flexible and prevent belt burning. Slow and easy clutch engagement. Towing/pushing at low RPM/low ground speed. Utility use/plowing snow, dirt, etc. Stuck in mud or snow. Use the throttle quickly and effectively for efficient engagement. Use low range only. Use low range only. Shift the transmission to low range, and carefully use fast, aggressive throttle application to engage clutch. WARNING: Excessive throttle may cause loss of control and vehicle overturn. Shift the transmission to low range, and carefully use fast, brief, aggressive throttle application to engage clutch. WARNING: Excessive throttle may cause loss of control and vehicle overturn. Climbing over large objects from a stopped position. Belt slippage from water Shift the transmission to neutral. Using the throttle, vary or snow ingestion into the the engine RPM from idle to full throttle. Repeat several PVT system. times as required. During this procedure, the throttle should not be held at the full position for more than 10 seconds. Clutch seals should be inspected for damage if repeated leaking occurs. Clutch malfunction. Contact your Polaris dealer for inspection of clutch components. Poor engine performance. Check for fouled plugs or foreign material in gas tank, fuel lines, or carburetor. Contact your dealer for service. 114

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
114
TROUBLESHOOTING
DriveBeltandCoverProblems
PossibleCause
Solution
Driving the ATV onto a
pickup or tall trailer in
high range.
Shift transmission to low range during loading of the ATV
to prevent belt burning.
Starting out going up a
steep incline.
When starting out on an incline, use low range or dis-
mount the ATV (after first applying the park brake) and
perform the K-turn as described on page 60.
Driving at low RPM or
low ground speed (at
approximately 3-7 MPH).
Drive at a higher speed or use low range more frequently.
The use of low range is highly recommended for cooler
PVT operating temperatures and longer component life.
Insufficient warm-up of
ATVs exposed to low am-
bient temperatures.
Warm the engine at least 5 minutes. With the transmission
in neutral, advance the throttle to about 1/8 throttle in
short bursts, 5 to 7 times. The belt will become more flex-
ible and prevent belt burning.
Slow and easy clutch en-
gagement.
Use the throttle quickly and effectively for efficient enga-
gement.
Towing/pushing at low
RPM/low ground speed.
Use low range only.
Utility use/plowing snow,
dirt, etc.
Use low range only.
Stuck in mud or snow.
Shift the transmission to low range, and carefully use fast,
aggressive throttle application to engage clutch.
WARNING:
Excessive throttle may cause loss of control
and vehicle overturn.
Climbing over large ob-
jects from a stopped posi-
tion.
Shift the transmission to low range, and carefully use fast,
brief, aggressive throttle application to engage clutch.
WARNING:
Excessive throttle may cause loss of control
and vehicle overturn.
Belt slippage from water
or snow ingestion into the
PVT system.
Shift the transmission to neutral. Using the throttle, vary
the engine RPM from idle to full throttle. Repeat several
times as required. During this procedure, the throttle
should not be held at the full position for more than 10
seconds. Clutch seals should be inspected for damage if
repeated leaking occurs.
Clutch malfunction.
Contact your Polaris dealer for inspection of clutch com-
ponents.
Poor engine performance.
Check for fouled plugs or foreign material in gas tank,
fuel lines, or carburetor. Contact your dealer for service.