2006 Polaris Ranger XP 700 EFI 4x4 Owners Manual - Page 101
2006 Polaris Ranger XP 700 EFI 4x4 Manual
Page 101 highlights
MAINTENANCE AND LUBRICATION Removal from Storage 1. Check the battery electrolyte level and charge the battery if necessary. Install it in the vehicle. Make sure the battery vent hose is routed properly and that it's not pinched or restricted in any way. 2. Make sure the spark plug is tight. 3. Fill the fuel tank with fuel. 4. Check all the points listed in the Daily Pre-Ride Inspection section on page 34. NOTE: Tightness of the bolts, nuts and other fasteners should be checked by an authorized Polaris dealer. 5. Lubricate at the intervals outlined in the Periodic Maintenance Chart beginning on page 53. WARNING Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness or death. Never run an engine in an enclosed area. Transporting the RANGER Follow these procedures when transporting the vehicle. 1. Turn off the engine and remove the key to prevent loss during transporting. 2. Place the transmission in gear. Engage the park brake. 3. Be sure the fuel cap, oil cap and seat are installed securely. 4. Always tie the frame of the RANGER to the transporting unit securely with suitable straps or rope. Do not attach tie straps to the front A-arm bolt pockets. 98