2006 Polaris Sportsman 450 Owners Manual - Page 105

MAINTENANCE AND LUBRICATION Accessories Auxiliary power outlets provide 12V power for operating accessories such as hand held spot lights. Accessory outlets are available for all models. Polaris also has a wide range of additional accessories available for your ATV. See your Polaris dealer. Cleaning and Storage See page 111 for the part numbers of Polaris products. Washing the ATV Keeping your ATV clean will not only improve its appearance but it can also extend the life of various components. The best and safest way to clean your ATV is with a garden hose and a pail of mild soap and water. Use a professional type washing mitten, cleaning the upper body first and the lower parts last. Rinse with water frequently and dry with a chamois to prevent water spots. Avoid the use of harsh cleaners which can scratch the finish. NOTE: If warning and safety labels are damaged, contact your Polaris dealer for free replacement. CAUTION High water pressure may damage ATV components. Polaris recommends washing the ATV by hand or with a garden hose using mild soap. Certain products, including insect repellants and chemicals, will damage plastic surfaces. Do not allow these types of products to come into contact with the ATV. If a high pressure water system is used, exercise extreme caution to avoid damaging wheel bearings, radiator, transmission seals, body panels, brakes and warning labels. Grease all zerk fittings immediately after washing, and allow the vehicle to run for a while to evaporate any water that may have entered the engine or exhaust system. Waxing the ATV Unless it has a special finish, your ATV can be waxed with any non-abrasive automotive paste wax. Do not wax models that have a camouflage finish. 102