2008 Polaris Sportsman 400 HO Owners Manual - Page 103
2008 Polaris Sportsman 400 HO Manual
Page 103 highlights
PVT System PVT Drying There may be some instances when water is accidently ingested into the PVT system. Use the following instructions to dry it out before operating. 1. Move the vehicle out of the water. 2. Remove the PVT drain plug. Use a 17 mm wrench, a flat screwdriver, or the spark plug wrench. 3. Allow the water to drain completely. Reinstall the drain plug. 4. Start the engine. Place the transmission in neutral. 5. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the belt and clutches. NOTE: Do not hold the throttle wide open for more than 10 seconds. MAINTENANCE PVT Drain Plug 6. Allow the engine RPM to settle to idle speed, then shift the transmission into forward gear. 7. Test for belt slippage. If the belt slips, repeat the process. 8. Take the vehicle to your dealer for service as soon as possible. 103