2010 Polaris 800 Dragon IQ Owners Manual - Page 107
2010 Polaris 800 Dragon IQ Manual
Page 107 highlights
MAINTENANCE Clutch System Drive Belt Removal NOTICE: Do not attempt to remove the drive belt after operating in reverse. The snowmobile must be stopped after forward motion to prevent damage to components during belt removal. Rotate the driven clutch counterclockwise 1/4 turn by hand to ensure forward engagement before attempting to remove the belt. 1. Stop the engine after operating in a forward motion. 2. Turn the ignition key off. + Wait for the engine to come to a complete stop. 3. Lock the parking brake. 4. Open the hood and remove the left side panel. 5. Rotate the driven clutch counterclockwise 1/4 turn by hand to ensure forward engagement. 6. Locate the L-wrench in the tool kit. Install the wrench into the open threaded hole in the outer sheave of the clutch (+). 7. Turn the wrench clockwise until the sheaves open far enough to remove the belt. If the wrench does not turn readily, rotate the driven clutch counterclockwise an additional 1/4 turn by hand and try again. 8. Grasp the belt at the lower edge and remove it. 104