2010 Polaris 800 Dragon IQ Owners Manual - Page 108
2010 Polaris 800 Dragon IQ Manual
Page 108 highlights
Clutch System MAINTENANCE Drive Belt Installation 1. Drop the drive belt over the drive clutch and pull back the slack. 2. To ensure satisfactory belt life, install belts so they operate in the same direction of rotation by positioning the identification numbers so that you can read them. If required, separate the sheaves as outlined in the belt removal procedures. 3. Rotate the L-wrench counterclockwise to tighten the sheaves while working the belt to the outer edge of the sheaves. 4. Remove the L-wrench and store it in the tool kit. 5. Reinstall the side panel. 6. Close and secure the hood. Torque Stop Periodically check torque stop clearance. With clutches in proper alignment, the torque stop clearance should be .010I.030I (.25-.75 mm) from the engine case. Adjust if necessary. Lock the jam nut. .010I-.030I (.25-.75 mm) 105