2011 Polaris Cross Roads Owners Manual - Page 113
2011 Polaris Cross Roads Manual
Page 113 highlights
CB Radio / ICOM System CB/ICOM Introduction In the U.S.A., refer to the Federal Communications Commission (FCC) Plain Rules pamphlet accompanying this rider's manual for a comprehensive guide of citizens band (CB) radio rules and regulations. Headset Use The use of helmet-mounted headsets may be restricted or prohibited in some areas. Always obey all applicable regulations and laws. The headsets have three separate volume settings: Intercom (ICOM) volume, CB receive volume and entertainment (ENT) volume. See page 106. CB Channels When the CB radio system is active, "CB" and the active channel will display. FM ICOM CB19 P1 ST 100.5 Press and hold COM on the upper left control to access the CHANNEL ADJUST screen. Push COM or ICOM to change channels. COM +/ICOM CHANNEL ADJUST Getting Started Tip: To minimize distractions while riding, always make adjustments to the CB/ICOM system prior to operating your motorcycle. Tip: To prevent battery drain, do not leave the key in the ACC position for long periods. VICTORY recommends using the audio system only when the engine is running. CB 19 Tip: Changing to a new channel may require changing the squelch setting. The ignition key must be in the ACC or ON position to use the audio system. 1. Press VOL (+) to turn the audio system on. 2. Press COM on the left control to activate the CB/ COM system. Wait 5 seconds or push VOL (+) or VOL (-) to exit the screen and return to the main display. 109