2011 Polaris Cross Roads Owners Manual - Page 81
2011 Polaris Cross Roads Manual
Page 81 highlights
Maintenance Sidestand Lubrication Periodically lubricate the sidestand pivot and the ends of the spring. See page 43 for sidestand inspections. Fastener Inspection 1. Inspect the entire motorcycle chassis and engine for loose, damaged or missing fasteners. Tighten loose fasteners to the proper torque. Lubricate Tip: Refer to the specifications section of this manual or the service manual for fastener torque values, or see your VICTORY dealer. 2. Always replace stripped, damaged or broken fasteners before riding. Use genuine VICTORY fasteners of equal size and strength. Side Covers Remove the left side cover to access the electronic control module, diagnostic connector and chassis-to-engine harness connector. Remove the right side cover to access the fuses, rear suspension air fitting, clutch cable adjuster, purge valve and flasher unit. Remove both side covers to access the seat screws. 1. Pull outward at each corner of the side cover to disengage the three darts. 2. Remove the side cover from the motorcycle. 3. To reinstall the side cover, make sure each rubber grommet is properly positioned. Align each dart with the appropriate grommet and press inward firmly to secure each dart. Grommets 77