2014 Polaris 600 Rush Pro-R Owners Manual - Page 106
2014 Polaris 600 Rush Pro-R Manual
Page 106 highlights
MAINTENANCE Clutch System Drive Belt Installation 1. Drop the drive belt over the drive clutch and pull back the slack. The belt cord line should be flush with, or slightly above, the outer circumference of the driven clutch sheaves. The belt will seat itself in the driven clutch during the break-in period. Adjust the belt ride-out after the break-in period by readjusting belt deflection. 2. To ensure satisfactory belt life, install belts so they operate in the same direction of rotation by positioning the identification numbers so that you can read them. If required, separate the sheaves as outlined in the belt removal procedures. 3. Turn the driven clutch moveable sheave clockwise while pushing inward and forcing the belt down between the sheaves. 4. Hold the belt down between the sheaves and roll the bottom portion over the outer clutch sheave. Work the belt to the outer edge of the sheave. 5. Rotate the L-wrench to tighten the sheaves. Remove the wrench and store in the tool kit. 6. Reinstall the side panel. 7. Break in the new belt. See page 69. 104