2014 Polaris 600 Rush Pro-R Owners Manual - Page 109
2014 Polaris 600 Rush Pro-R Manual
Page 109 highlights
MAINTENANCE Track Maintenance Track Tension 5. Check for specified slack between the wear surface of the track clip and the plastic slider. Refer to the Track Tension Data Chart on page 106. If the track needs adjustment: 6. Loosen the rear idler shaft bolt. 7. Loosen the locknuts. Track Adjusting Screw Lock Nut Slack Measurement Idler Shaft Bolt 16 inches (40 cm) Track 10 lbs. (4.54 kg) 8. Tighten or loosen the track adjusting screws to provide equal adjustment on both sides of the track. 9. Repeat the measurement on the other side of the track. TIP: Check more frequently when the snowmobile is new. 10. Remove the weight. Start the engine and slowly rotate the track at least five revolutions. Let the track come to a stop (do not apply brakes). 11. Check track alignment (see page 108) and adjust as necessary. 12. Tighten the locknuts. 13. Tighten idler shaft bolts to 35 ft. lbs. (47.5 Nm). 107