2014 Polaris Ranger EV Owners Manual - Page 56

MAINTENANCE Gearcases Gearcase Specification Chart Gearcase Main Gearcase (Transaxle) Front Gearcase Lubricant ATV Angle Drive Fluid Demand Drive Fluid Capacity 20.3 oz. (600 ml) 5.1 oz. (150 ml) Fill Plug Torque Drain Plug Torque 14 ft. lbs. (19.4 Nm) 8-10 ft. lbs. (11-13.6 Nm 14 ft. lbs. (19.4 Nm) 11 ft. lbs. (15 Nm) Main Gearcase (Transaxle) Always check and change the main gearcase oil at the intervals outlined in the Periodic Maintenance Chart beginning on page 52. Maintain the oil level even with the bottom thread of the fill plug hole. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications. See page 70 for the part numbers of POLARIS products. Oil Check The fill plug is located at the right rear of the vehicle. 1. Position the vehicle on a level surface. 2. Remove the fill plug. 3. Check the oil level. 4. Add the recommended oil as needed. 5. Reinstall the fill plug. Torque to specification. Fill Plug Drain Plug Oil Change The drain plug is located on the lower right side of the main gearcase, near the fill plug. Refer to the Fill Plug Drain Plug Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications. 1. Remove the fill plug. 2. Place a drain pan under the drain plug. Remove the drain plug. Allow the oil to drain completely. 3. Wipe the magnetic end of the drain plug clean to remove accumulated metallic filings. 4. Reinstall the drain plug. Torque to specification. 5. Add the recommended oil as needed. Do not overfill. 6. Reinstall the fill plug. Torque to specification. 7. Check for leaks. Dispose of used oil properly. 54