2014 Polaris Ranger EV Owners Manual - Page 62

2014 Polaris Ranger EV Manual

Get 2014 Polaris Ranger EV PDF manuals and user guides View all 2014 Polaris Ranger EV manuals

Page 62 highlights

MAINTENANCE Lights Brake Lights When the brake pedal is depressed, the brake light comes on. Check the brake light before each ride. 1. Turn the key to the ON position. 2. Depress the brake pedal. The brake light should come on after about 10mm (0.4 in.) of pedal travel. If the light doesn't come on, check the bulb. Indicator Lamp Replacement 1. Lift the hood. Release 2. Reach in behind the console panel and lift the Tab release to unplug the light from the harness. 3. Using a flathead screwdriver, press on the tab on the top of the light to remove the indicator light assembly from the console panel. 4. Locate the expired lamp. Using a screwdriver, rotate the lamp 1/4 turn counter-clockwise. 5. Grip the lamp with a needle-nose pliers and remove it from the assembly. 6. Install the new lamp. Using a screwdriver, rotate the lamp 1/4 turn clockwise to seat it. 7. Snap the assembly back into the console panel. Reconnect the harness. 8. Close the hood. 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
60
MAINTENANCE
Lights
Brake Lights
When the brake pedal is depressed, the brake light comes on. Check the brake light before
each ride.
1.
Turn the key to the ON position.
2.
Depress the brake pedal. The brake light should come on after about 10mm (0.4 in.) of
pedal travel. If the light doesn't come on, check the bulb.
Indicator Lamp Replacement
1.
Lift the hood.
2.
Reach in behind the console panel and lift the
release to unplug the light from the harness.
3.
Using a flathead screwdriver, press on the tab on
the top of the light to remove the indicator light
assembly from the console panel.
4.
Locate the expired lamp. Using a screwdriver,
rotate the lamp 1/4 turn counter-clockwise.
5.
Grip the lamp with a needle-nose pliers and
remove it from the assembly.
6.
Install the new lamp. Using a screwdriver, rotate the lamp 1/4 turn clockwise to seat it.
7.
Snap the assembly back into the console panel. Reconnect the harness.
8.
Close the hood.
Tab
Release