2014 Polaris Ranger XP 900 Owners Manual - Page 32

FEATURES AND CONTROLS Instrument Cluster High water pressure may damage components. Wash the vehicle by hand or with a garden hose using mild soap. Do not use alcohol to clean the instrument cluster. Do not allow insect sprays to contact the lens. Speedometer Indicator Lamps Speedometer The speedometer displays vehicle speed in either miles per hour (MPH) or kilometers per hour (km/h). See page 32. Rider Information Center MODE Button Indicator Lamps Lamp Indicates Vehicle Speed When metric mode is selected, speed displays in kilometers per hour. Over Temperature This lamp illuminates to indicate an overheated engine. If the indicator flashes, the overheating condition remains, and the system will automatically reduce engine power. This indicator illuminates briefly when the key is turned to the ON position. If the light remains on, the EPS system is inoperative. See your authorized POLARIS dealer for service. This lamp illuminates when the transmission is in neutral and the ignition key is in the ON position. This lamp illuminates when the headlamp switch is set to high beam. This lamp flashes for several seconds when the key is turned to the ON position. The lamp is a reminder to the operator to ensure all riders are wearing helmets and seat belts before operating. This indicator appears if an EFI-related fault occurs. Do not operate the vehicle if this warning appears. Serious engine damage could result. See your dealer. Condition When standard mode is selected, speed displays in miles per hour. EPS Warning (if equipped) Neutral High Beam Helmet/Seat Belt Check Engine 30