1999 Pontiac Grand Am Owner's Manual - Page 255

yellowblue Center High-Mounted Stoplamp 1. Open the trunk lid and locate the center high-mounted stoplamp on the inside of the lid. 2. Using a flat screwdriver, remove the screws holding the bulb assembly. 3. Use a Phillips screwdriver to remove the three screws. 4. Gently remove and replace the bulbs. 5. Reverse this procedure to reassemble the lamp. Turn Signal and Stop/Taillamp Bulb Replacement For the type of bulb, see "Replacement Bulbs" in the Index. 1. Disconnect the cargo net in the trunk. 2. Pull back the trunk trim. 3. Remove the four wing nut bolts which fasten the taillamp lens to the vehicle. 4. Carefully remove the taillamp lens from the body and avoid scratching the paint or dropping it. 5. Press the five tabs to release the plate from the lamp. 6. To remove a bulb, gently pull the bulb out from the socket. 7. Reverse Steps 3 through 6 to reassemble the taillamp. 6-33