2004 Pontiac Montana Owner's Manual - Page 213
2004 Pontiac Montana Manual
Page 213 highlights
Directing the Airflow To direct the airflow to the rear-seating area, use the right knob located on the main climate-control panel. • Select vent or bi-level mode to direct air to the rear of the vehicle through the overhead outlets. If using the main climate-control panel, then the air-conditioning system must be on to direct cooled air to the rear of the vehicle. If it is not on, then the temperature in the rear of the vehicle will remain at cabin temperature. If a rear-seat passenger is adjusting the temperature, do the following: Turn the right knob, located on the overhead rear-control panel, behind the driver's seat, clockwise or counterclockwise to raise or lower the temperature in the rear-seating area only. • Select floor, defog or defrost mode to direct air to the rear of the vehicle through the floor outlets. Generally the upper outlets are used for air conditioning and the floor outlets are used for heating. Selecting the Fan Speed 9 (Fan): Turn the fan knob on either rear fan control to numeral 1, 2, or 3 to increase or decrease airflow to the rear-seating area. Turn the fan knob on either rear fan control to 0 or OFF to turn off the fan. Rear Air Outlets To increase airflow through the rear floor outlets, place the left bucket seat in the second row in the forward position. For more information, see Rear Seat Operation on page 1-7. The outlet behind the left rear seat is the cold air return outlet. Be sure to keep it free from obstructions. Also, keep the area around the base of the center instrument panel console, between and under the front seats, free of objects that could also obstruct airflow to the rear-seating area. For more information on how to use the main climate control system, see "Climate Control System" listed previously in this section. For information on ventilation, see "Outlet Adjustment" under "Climate Control System" listed previously in this section. 3-31 Setting the Temperature If the driver is adjusting the temperature, do the following: To increase or decrease the temperature for the entire vehicle, use the temperature controls located on the main climate-control panel.