2000 Saab 9-3 Owner's Manual - Page 72

72 Instruments and controls Courtesy Headlamp Feature A delay function allows the headlights to remain on low beam for about 30 seconds after the driver's door has been closed. To activate this function, switch off the ignition, remove the key, open the driver's door and pull the high/low beam control stalk towards the steering wheel like you are flashing the high beam, see page 71. The low beam headlights will now come on immediately after the driver's door has been closed and will remain on for about 30 seconds. IB748 Turn signal & lane change indicators 1 Right indicators 2 Left indicators Hazard warning lights When this button is pressed, all the turn signal & lane change indicators and a symbol in the button flash simultaneously. If the ignition is on, both indicator lights on the instrument panel will also flash. If the hazard warning lights are left on for some time, the flasher frequency will be reduced to save the battery. Hazard warning lights should only be used if, because of an accident or breakdown, the car constitutes a hazard to other road users. Turn signal & lane change indicators To switch on the indicators, move the stalk up or down. The stalk has fixed positions for indicating a right or left turn, and the indicators are cancelled automatically (stalk returns to off position) after most turns. The stalk also has an intermediate, spring-loaded position that is useful for signalling when changing lanes or passing. The respective indicator lights on the instrument panel flash at the same frequency as the indicators IB749