2003 Saab 9-3 Owner's Manual - Page 66

66 Instruments and controls Resetting a single function 1 Select the function you wish to reset with the INFO dial. • Fuel Ø • Speed Ø • Trip (Dist used as trip meter) 2 Press and hold the CLEAR button for approx. 1 second. The selected function will now be reset. Resetting the trip computer 1 Select one of the functions using the INFO dial. • Fuel Ø • Speed Ø • D.T.E. • Arriv • Trip (Dist used as trip meter) 2 Press and hold the CLEAR button (approx. 3 seconds) until audible confirmation is given. Speed warning This value is preset to 55 mph (90 km/h). The value can be set to between 0 and 150 mph (0 and 250 km/h). 1 Select Speed W using the INFO dial. 2 Press and hold the INFO dial until given audible confirmation. 3 Adjust the speed using the INFO dial. 4 Confirm the setting by pressing the INFO dial. A star on the right-hand side of the display indicates when the speed warning function is active. An audible alarm will sound if the set speed is exceeded. Disengage the function with the CLEAR button. Re-engage the function using the INFO dial. Setting values 1 Select one of the functions using the INFO dial. • Speed W (preset to 55 mph (90 km/h) • Dist (preset to 100 miles (100 km) if not previously set) • Speed Ø • Arriv • Date 2 Press and hold the INFO dial until given audible confirmation. 3 Turn the INFO dial to change the value. (Press CLEAR to reset the value.) 4 Press the INFO dial to finish setup. Using DIST as a trip meter 1 Select Dist using the INFO dial. 2 Press and hold the CLEAR button for approx. 1 second. An arrow will now appear on the right-hand side of the display, indicating that the trip meter is running.