2005 Saab 9-3 Owner's Manual - Page 94

92 Instruments and controls Clock Settings can be made from Profiler. 1 Press the CUSTOMIZE button to go to Profiler. 2 Select Clock / Alarm using the INFO dial. 3 Press in the INFO dial. 4 Select Set Clock. 5 Select Manual. Select Manual to set the time, year, month and day. Manual setting: 1 Turn the INFO dial to change the value. 2 Press the INFO dial once after each setting (time, year, month and day) to confirm the value. Once you have selected the day, press the INFO dial to finish setting and update the clock. Press the CLEAR button once to go back a step when setting the time, year, month and day manually. Press the CUSTOMIZE button to cancel setting. RDS setting: The time, year, month and day can also be set from the RDS signal (from RDS Adjust) provided that the RDS signal from the current station contains this information. This may vary between different radio stations and different countries. Clock / Alarm Set Clock RDS Adjust Manual Clock 11:30 Year 2003 Month Dec Day 1 Mon When the remote control is not in the ignition switch, you can illuminate the clock for 5 seconds by pressing the INFO dial. Under Profiler you can choose whether the entire speedometer scale (0-160 mph) or only part of the scale (0-90 mph) should be illuminated in NIGHTPANEL mode. 1 Press the CUSTOMIZE button to go to Profiler. 2 Select System Settings using the INFO dial. 3 Press in the INFO dial. 4 Select Speed Scale Illum. Select 0-160 mph or 0-90 mph. System Settings Speed Scale Illum. 0-160 mph 0-90 mph