2005 Saab 9-5 Owner's Manual - Page 69
2005 Saab 9-5 Manual
Page 69 highlights
Instruments and controls 67 Switches Daytime running lights The parking lights and daytime running lights come on automatically when the ignition switch is ON. Note to owners in the U.S.: If you do not want Daytime Running Lights, this feature can be disconnected: switch off the engine and remove fuse No. 35 (see page 213). Note to owners in Canada: Daytime Running Lights must not be disconnected as they are a Canadian Federal legal requirement. 1 2 Light switches IB350 1 High beam signal 2 High/low beam switching Parking lights The parking lights can be switched on regardless of the position of the ignition switch. Do not use parking lights when driving. Note: The lighting switch must be in parking light or headlight position (low beam position only) to operate the fog lights (see page 70). Headlights The headlights come on automatically when the ignition is ON and go off when the ignition switch is turned to the LOCK position. The parking lights, however, can be on when the ignition switch is in the LOCK position. High beam flasher The headlights come on to high beam when the stalk is pulled to the first spring-loaded position (position 1) and remain on until the stalk is released. High/low beam To switch between high and low beam, pull the control stalk fully towards you (position 2). When the high beam is on, the indicator on the main instrument panel will be illuminated. IB1594
![](/manual_guide/autos/2005-saab-95-owners-manual-2bb45f0/69.png)