2005 Saab 9-7X Owner's Manual - Page 305

5. Be sure that the notches are locked by the bottom claws. Make sure that all other claws are properly locked on both sides of the insert slots. 6. Put the blade assembly pivot in the wiper arm hook. Pull up until the pivot locking tab locks in the hook slot. 7. Carefully lower the wiper arm and blade assembly onto the windshield. Backglass Wiper Blade Replacement 1. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position like the windshield wiper blade, so care should be used when pulling it away from the vehicle. 2. Pull down on the wiper blade assembly to remove it from the wiper arm. 3. Replace the wiper blade. A. Claw in Notch B. Correct Installation C. Incorrect Installation 5-53 2005 - Saab 97X Owner Manual