2006 Saturn VUE Owner's Manual - Page 264

Changing a Tire When Trailer Towing If you get a flat tire while towing a trailer, be sure to secure the trailer and disconnect it from the vehicle before changing the tire. The wires do not have a connector and should be wired to the trailer by a qualified electrical technician. The technician can use the following information when connecting a trailer wiring harness to your vehicle. Trailer Wiring Additional wire length has been provided for connecting trailer wiring to your vehicle. A loop of five wires is stored below the jack, which is located on the driver's side of the cargo area. The wires are fused in both the underhood and instrument fuse block. See Instrument Panel Fuse Block on page 5-95 and Underhood Fuse Block on page 5-96. Yellow: Left Turn Signal Brown: Parking Lamps Light Blue: Stop Lamps Black: Ground Wire Dark Green: Right Turn Signal When connecting a trailer harness, be sure you leave it loose enough so the wiring does not bend or break, but not so loose that it drags on the ground. Store harness below jack in the cargo area when it is not in use. Wrap the harness together and tie it neatly so it will not be damaged. 4-62