2007 Saturn SKY Owner's Manual - Page 282

Back-Up Lamps License Plate Lamp To replace the license plate lamp bulb, do the following: The back-up lamps are located in the rear bumper. To replace a bulb, do the following: 1. Reach behind, up and under the rear bumper and locate the bulb socket. 2. Turn it counterclockwise to remove from the bulb assembly. 3. Pull the bulb from the bulb socket. 4. Push in a new bulb into the bulb socket. 5. Reinstall the bulb socket by lining up the tabs in the lamp assembly and turn it clockwise to secure it. 282 1. Remove the two screws holding the license plate lamp assembly to the fascia. 2. Turn and pull the license plate lamp forward through the fascia opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the lamp assembly.