2008 Saturn Aura Owner's Manual - Page 136
2008 Saturn Aura Manual
Page 136 highlights
Headlamp High/Low-Beam Changer To change the headlamps from low beam to high beam, push the turn signal/multifunction lever away from you. This light comes on in the instrument panel cluster if the high beam lamps are turned on while the ignition is in ON/RUN. Windshield Wipers To change the headlamps from high beam to low beam, pull the turn signal lever toward you. Use this lever, located on the right side of the steering wheel, to operate the windshield wipers. Flash-to-Pass This feature lets you use your high-beam headlamps to signal a driver in front of you that you want to pass. To use it, pull the turn signal/multifunction lever toward you until the high-beam headlamps come on, then release the lever to turn them off. 9 (Off): Move the lever to this position to turn off the windshield wipers. & (Intermittent; Speed Sensitive Wipers): Move the lever to this position for intermittent or speed sensitive operation. The amount of delay time varies between wiping cycles due to the delay setting selected or the speed of the vehicle. As vehicle speed is increased or decreased, the wiper interval will also increase or decrease. 3-8